StoArmat Render System


Solutions for AFS Logicwall® and Rediwall® Construction



Overview

Quick to install and easy to maintain, AFS Logicwall and Rediwall has a proven record of providing economical facade solutions with design flexibility, that meets todays requirements for architects and builds. The StoArmat Render System is fracture, impact resistant and engineered to provide optimal protection and finish for AFS Logicwall and Rediwall construction, to compliment, protect and enhance this building element.

 






Brochure

Brochure
StoArmat Render System - AFS Logicwall and Rediwall Construction
PDF
Brochure
StoArmat Warranty with StoService Assurance
PDF

 






StoArmat Render System
on AFS Logicwall®

Before render system application, AFS Logicwall is sealed and all joints are flushed using StoArmat render embedded with Sto Jointing Mesh for reinforcement. StoArmat render and glass fibre mesh is then applied over the full substrate, providing engineered reinforcement to reliably dissipate tensile, seismic and shear stress. Finished with perfectly interlocking components: Stolit fibre-reinforced coloured finishing render plus StoColor or StoClear; creating a 4mm weather tight reinforcement system for reliability and protection that surpasses the facade durability requirements.

 

Application is carried out by a Sto Registered Contractor (Licensed Building Practitioner) and comes with the added protection of a StoArmat 15 or 20 Year Warranty with StoService Assurance, ensuring the materials used and application meets building code standards, with a service plan for long-term performance..

 

 

 

 

StoArmat Render System on AFS Logicwall
Click on each of the layers below to view the components of the system.

 

 

Component Builder afs_armat_system_170 afs_armat_system_141 afs_armat_system_160 afs_armat_system_150 afs_armat_system_140 afs_armat_system_130 afs_armat_system_120 afs_armat_system_110

 

01

Substrate: AFS Logicwall®

Fibre cement permanent formwork for above-ground intertenancy wall applications.

 

02

Primer: Sto Putzgrund

Water based primer in a pail, containing an organic binder and good adhesion properties.

 

bucket

 

03

Joint Treatment:
StoArmat / Sto Jointing Mesh

Easy to install, meeting the highest requirements for crack, stress and alkalinity resistance.

 

bucket

 

04

Reinforcement Render: StoArmat Render

An organic, weather resistant, cement-free and breathable, high-impact render, with a crack resistance six times higher than that of standard cement-based plasters.

 

sto bucket    stoarmat bend test

 

05

Plus: Sto Glass Fibre Mesh 4/7mm

Easy to install, meets the highest requirements for crack, stress and alkalinity resistance.

 

mesh

 

06

Finishing Render: Stolit Renders

Organically bound, highly weather resistant, strong, hard-wearing, impact-resistant, pre-coloured finishing renders. (No cement)

 

Stolit K Range

Stolit MP & MP Natural

Stolit Milano

 

plaster bucket

 

07

Coating:

StoColor coating based on IQ Technology for functional facades or a StoClear sealer.

 

StoColor Maxicryl

StoColor Dryonic

S-Protect SC Clear Sealer

 

sto-bucket

 

branz appraisal

Based on BRANZ Appraisal No. 488 / No. 515

sto warranty

StoArmat 15 or 20 Year Warranty with StoService Assurance

 

 

 


 

 

 

StoArmat Render System
on AFS Rediwall®

If required an optional basecoat render to straighten the Rediwall formwork is applied. StoArmat render and glass fibre mesh is applied over the full substrate, providing engineered reinforcement to reliably dissipate tensile, seismic and shear stress. Finished with perfectly interlocking components: Stolit fibre-reinforced coloured finishing render plus StoColor or StoClear; creating a 4mm weather tight reinforcement system for reliability and protection that surpasses the facade durability requirements.

 

Application is carried out by a Sto Registered Contractor (Licensed Building Practitioner) and comes with the added protection of a StoArmat 15 or 20 Year Warranty with StoService Assurance, ensuring the materials used and application meets building code standards, with a service plan for long-term performance.

 

 

 

 

StoArmat Render System on AFS Rediwall
Click on each of the layers below to view the components of the system.

 

 

Component Builder afs_armat_system_210 afs_armat_system_240 afs_armat_system_250 afs_armat_system_241 afs_armat_system_260 afs_armat_system_270

 

01

Substrate: AFS Rediwall®

PVC permanent formwork for below-ground and selected above ground construction applications.

 

02

Reinforcement Render: StoArmat Render

An organic, weather resistant, cement-free and breathable, high-impact render, with a crack resistance six times higher than that of standard cement-based plasters.

 

sto bucket    stoarmat bend test

 

03

Plus: Sto Glass Fibre Mesh 4/7mm

Easy to install, meets the highest requirements for crack, stress and alkalinity resistance.

 

mesh

 

04

Finishing Render: Stolit Renders

Organically bound, highly weather resistant, strong, hard-wearing, impact-resistant, pre-coloured finishing renders. (No cement)

 

Stolit K Range

Stolit MP & MP Natural

Stolit Milano

 

plaster bucket

 

05

Coating:

StoColor coating based on IQ Technology for functional facades or a StoClear sealer.

 

StoColor Maxicryl

StoColor Dryonic

S-Protect SC Clear Sealer

 

sto-bucket

 

branz appraisal

Based on BRANZ Appraisal No. 488 / No. 515

sto warranty

StoArmat 15 or 20 Year Warranty with StoService Assurance

 

 

 


 

 

Finishes

Stolit: Coloured Finishing Renders

Stolit organic finishing renders are manufactured in Germany incorporating the latest technology; certified globally and successfully applied to rendered substrates in every climatic zone for over 50 years.

 

The Stolit range provides the perfect combination of properties: durable, strong, hard-wearing, impact-resistant, malleable, weather-resistant, colour-stable and highly resistant to microorganisms. In addition, its vapour permeability allows your building to breathe while still repelling water.

 

 

Coloured Self-Gauging Float Finish Renders:

StolitK 1.0mm StolitK 1.5mm StolitK 2.0mm StolitK 3.0mm

Stolit K 1.0mm

Stolit K 1.5mm

Stolit K 2.0mm

Stolit K 3.0mm

 

Coloured Fine Float, Sponge, or Light Adobe Finish Renders:

StolitK MP StolitK MP Natural Stolit Milano  

Stolit MP

Stolit MP Natural

Stolit Milano

 

 

 


 

 

Facade Coatings

StoColor facade paints and StoClear sealers are a range of a serviceable coatings embodying intelligent technology for a range of surface functions to compliment the architectural structure and design. The StoColor System with 1000 shades, AC Architectural Colors, or matched to any colour using the Sto Spectrometer, provides a clear framework and systematic approach to colour based on integrated layers, combining texture and colour for aesthetic appeal.

 

 

Product

StoColor Maxicryl
Acrylic facade paint with high covering power and colour fastness for a natural look.

StoColor Dryonic
Biomimetic facade paint with Dryonic® Technology, for dry and clean facades to protect against algae and fungal attacks, with SunBlock and X-black Technology.

S-Protect SC Clear Sealer
Invisible silane treatment to repel water instantly and help prevent the adhesion of contaminants.

StoColor System
View the StoColor System here

 

Sto Paint

 

 

 


Data Sheets

sto detail expand

 

Download a Data Sheet:

Technical Datal Sheet (TDS) / Material Saftey Data Sheet (MSDS) / Sustainability Data Sheet (SDS)

 

Primers / Sealers:

 

DS
StoFlexyl
PDF PDF PDF
DS
StoPlex W
PDF PDF
DS
Sto-Putzgrund
PDF PDF PDF

 

Reinforcement Mesh:

 

DS
Sto Glass Fibre Mesh 4mm
PDF
DS
Sto Glass Fibre Mesh 7mm
PDF

 

Reinforcement Render / Base Render:

 

DS
StoLevell Novo
DS
StoArmat Classic Render
PDF PDF PDF

 

Finishing Renders:

 

DS
Stolit K 1.0mm
PDF PDF PDF
DS
Stolit K 1.5mm
PDF PDF PDF
DS
Stolit K 2.0mm
PDF PDF PDF
DS
Stolit K 3.0mm
PDF PDF PDF
DS
Stolit MP & MP Natural
PDF PDF PDF
DS
Stolit Milano
PDF PDF

 

Coatings:

 

DS
StoColor Maxicryl
PDF PDF PDF
DS
StoColor Dryonic
PDF PDF
DS
S-Protect SC Clear Sealer
PDF PDF

 


Specifications & BRANZ Appraisal

sto detail expand

Download a Technical Specification

Please register all completed Sto specifications to info@sto.co.nz to ensure project confirmation and Sto warranty.

 

SS256
StoArmat Render System over AFS Logicwall Construction
Specification Icon
SS276M
StoArmat Render System over AFS Rediwall Construction
Specification Icon
SS256I
StoTherm Armat Render System over AFS Logicwall Construction
Specification Icon
MasterSpec
4282SR - Sto Masonry Render Systems
Specification Icon

 

 

 

Download a BRANZ Appraisal

 

BRANZ Appraisal
StoArmat Render System over AFS Logicwall and Rediwall
Based on BRANZ Appraisal No. 488
Branz Appraisal

 

BRANZ Appraisal
StoArmat Miral Render System over AFS Logicwall and Rediwall
Based on BRANZ Appraisal No. 515
Branz Appraisal

 


CAD or PDF Details

sto detail expand

 

Download a Detail Set

 

For an AFS Logicwall or Rediwall detail please refer to the AFS website here.
For StoArmat Render System details please contact us.

 





Disclaimer: These drawings have been issued as a guideline. The sequence work covers various building components, each trade is responsible to ensure their elements are fully installed, including all waterproofing / sealant / flashings as is applicable.
 
Last updated October 2024